PD20A-ASP-AAA-B
2” EXP Metallic Diaphragm Pump
PD20A-ASP-AAA-B
Maximum Flow gpm (l/min): 172 (651)
Maximum Discharge Pressure psi (bar): 120 (8.3)
Fluid Ports Inlet/Outlet (bsp): 2” NPTF Rp2 (2-11 BSP) (Side or Center)2” ANSI/DIN Flange with 2” pipe tap (SS only/Center)
Material of Construction: Aluminum, Cast Iron, Stainless Steel, Hastelloy®
Maximum Solids in (mm): 1/4 (6.4)
Maximum Dry Suction Lift ft (m): 14 (4.2)
PD20A-ASP-AAA-B
ARO 2” metallic diaphragm pumps achieve flow rates up to 172 GPM (651 LPM) and offer a wide array of material and porting configurations.
These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Paint, Oil & Gas, Chemical and Petrochemical markets.
Available with Long-life PTFE diaphragms.
Features
The Ultimate in heavy duty pump design.
Up to 4 times the life of traditional diaphragm pumps due to the EXP’s new convoluted diaphragm design.
• Efficiency – Simul-Shift™ valve provides ultra-positive, reliable shift signal
• Reliability – ARO’s patented ‘Unbalanced’ air valve ensures no-stall operation
• Versatility – Broad range in materials of construction for optimum fluid compatibility
• Environmentally Sound – Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking
• Serviceability – Ease of service through modular design
Accessories
• 66312 Air Line Connection Kit: contains Piggyback Filter / Regulator, pipe nipple & 5’ section of hose
• 67237 Diaphragm Failure Detection (DFD)
• 67350-1 Cycle Counter Kit
• 67263 Continuous-Duty Muffler
• 67174-20 Screened Inlet Adapter Kit
• 637421 Air Section Service Kit
• 637309-XX Fluid Section Service Kit
Weight | 68 kg |
---|---|
Size | |
Centre | |
Hardware | |
Thread | |
Wetted | |
Diaphragm | |
Ball | |
Seat | |
Air Kit | |
Wet Kit |